Heat Pumps & Heating

MACBETH Publishes CharIN-Led Specification for Multipoint MCS Truck Charging Hubs

A shared reference for truck megawatt hub layouts, power architectures and interface requirements, set to guide pilots in Belgium and Sweden.

Details

  • PublishedNovember 15, 2026
  • Reading5 min
  • SectionHeat Pumps & Heating
  • Views9

In this article

  1. Two reference site layouts
  2. Shared and modular power cabinets
  3. Communication, security and availability
  4. Standards mapping and four open areas
An electric heavy-duty truck drives through a megawatt charging lane while another waits in a buffer zone, with modular power cabinets and a central converter cabinet linked to the charge posts.

The EU-funded MACBETH project has published a specification for multipoint Megawatt Charging System (MCS) hubs for electric trucks. The Charging Interface Initiative (CharIN) led the work and authored the document together with VTT Technical Research Centre of Finland.

The publication, Deliverable D4.1, is a shared reference framework for site layouts, power architectures and technical requirements, and will guide the project's pilots in Belgium and Sweden. VTT coordinates MACBETH, a Horizon Europe project that is due to end in January 2029.

The specification treats the hub as a whole site rather than a single charger, combining physical layout, power conversion architecture and the communication and security layers that sit between vehicle and charger.

Two reference site layouts

The deliverable describes two reference site layouts. In a drive-through design, trucks enter, charge and leave in a forward-only flow, without reversing. The second layout adds a dedicated waiting area, a buffer zone where vehicles queue until a charger is free, and is designed to improve traffic management at high utilization.

Shared and modular power cabinets

Two power concepts are set out:

  • A shared power cabinet concept, in which one central conversion system distributes power dynamically across several charge points based on vehicle demand, priorities and grid limits.
  • A modular multi-cabinet concept, in which capacity grows by adding independent cabinets, designed to offer redundancy and step-by-step scalability for smaller or early-stage sites.

The waiting-area layout is positioned for high-utilization sites, while the modular cabinet approach is positioned for smaller or early-stage sites that expect to grow in steps.

Communication, security and availability

Vehicle-to-charger communication is based on ISO 15118-20 with its MCS profile, using a 10BASE-T1S physical layer. The security baseline is mutual EV-EVSE authentication plus TLS 1.3. The specification also includes a charger uptime target above 97%, heating for winter conditions and cooling to sustain megawatt power. Site energy management can throttle charger output during power peaks.

Standards mapping and four open areas

D4.1 maps the hub concepts against more than 40 ISO, IEC and EN standards and identifies four areas that existing standards do not yet fully address: power sharing and arbitration between simultaneous MCS sessions, automated and robotic MCS connections, guidance for mixed CCS and MCS sites, and site-level effects such as cumulative noise and waste heat.

Yancho Todorov, Senior Scientist at VTT and coordinator of the MACBETH project, said the project combines research and industry expertise with CharIN's standardization leadership, with the aim of ensuring that megawatt charging can be deployed at scale across Europe and deliver real value for electric heavy-duty transport.